Pellet
 

Fusion Pellet Stove

Clean lines and compact design combine high efficiency,clean burning and automatic control with all the warmth and comfort of wood heating. With a 9kW output, the Fusion provides a beautiful warmth and is suitable for any large room.        

 

Features

  • Automatic start up cycle
  • Modulating heat output capacity from 3.2kW - 9.1kW
  • Built in room thermostat
  • Optional remote control thermostat
  • 7 day programmer 2 on/off periods per day
  • Efficiency > 81%
  • Automatic chimney cleaning cycle
  • Fan assisted convection air
  • Room humidifier
  • Automatic overheat and chimney safety shutdown
  • Hopper capacity 25kg
  • Removable ash tray & burn pot

 

Dimensions

  • Height 1032mm
  • Width 637mm
  • Depth 566mm

 

Model Specification Table

Model Boiler Output Room Heat Radiators
Fusion NB N/A From 3.2kW to 9.1kW N/A

 

Servicing and commissioning

  • This stove qualifies for the Greener Homes Grant scheme. Contact Sustainable Energy Ireland 1850 734 734 or http://www.sei.ie/
  • This stove should be commissioned by a Stanley Engineer. Contact the Stanley service department to arrange free commissioning.
  • It is recommended that the firebox is clean periodically and the appliance is serviced by a Stanley Engineer annually.

 

Installation requirements

  • The unit should be connected to an existing chimney using an 80mm flexible liner to an external flue using an 80mm twin wall pipe (see diagram).
  • Power Supply: 230V 50Hz via 13 amp plug top.
  • Minimum of 400mm clearance to combustibles
  • Install on a level, non combustible hearth, 1020mm (d) x 910mm (w).
  • 6mm diameter pellets must be used.